Vent3® Pro

 

Vent 3® Pro

Breathable Membranes

Vent3 Pro is a triple layer fabric, high performance breather membrane, made from high tensile spun bonded polypropylene layers, around a micro porous polypropylene film. Designed for use in a fully supported or unsupported tiled, slated or metal roof system. The high vapour permeability and waterproof nature of the membrane, combined with excellent tensile/tear strength and high wind uplift resistance make Vent3 the professional’s choice as the ultimate breather membrane. It is equally suitable whether draped unsupported over rafters or laid directly over insulation.
The outer layer forms the functional waterproof surface, the middle layer is the breathable waterproof membrane, and the inner layer protects the membrane from abrasion and damage, also giving additional strength. This enables the fabric to allow moisture vapour to pass through, whilst remaining fully waterproof. The upper surface is Green, printed with the trade name and head lap lines. Available in 1.0m and 1.5m widths as standard to conform easily to any typical roof configuration or the individual working practices of the installer.

Benefits:
• BBA certified
• Cold & Warm roof application
• 3 layer spun-bonded membrane
• Clean and easy to use
• Excellent tensile strength
• No gusting wind noise
• UV stable for up to 3 months
• Excellent nail tear resistance
• Weight 170gsm

Roll sizes available:
15m x 1m
25m x 1m
50m x 1m
50m x 1.5m

   







Download the Declaration of Performance.
You are here: Home Roofing roofing Membranes Vent3® Pro